satdish

logo
     
   
Home
Products
Warranty
About
Contacts
Services
Terms
Agents
 
 

Back to Product Page

Model ASC 300Ku1-E: Beacon Tracking Receiver (10.7 - 11.70 GHz)
(External Block Down Converter)

300kupic

Ku1-E Beacon Tracking Receiver Specifications
 

Functional Description:

The Model ASC300Ku1-E Beacon Tracking Receiver is a high performance unit that is designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. The ASC300Ku1-E will tune over Ku band satellites (10.7-11.70 GHz) by utilizing an external block down converter. The frequency band must be customer specified. 

The applications for the ASC300Ku1-E:

bullet

Antenna Tracking Controllers

bullet

Uplink Power Controllers

System Specification;

bullet

Input Frequency...................................................10.7 to 11.70 GHz

bullet

Pre-detection Bandwidth.........................................60 kHz Standard
Other Bandwidths Available

bullet

Input Level...........................-90 dBm, minimum; -30 dBm, maximum
For full tracking range capability

bullet

Frequency Tuning.......................................................10 kHz Steps

bullet

Frequency Adjust........................................Front Panel or Remotely

bullet

Frequency Stability..........................................<1 ppm,00c to +500c

bullet

AFC.................................................................................+ 30 kHz

bullet

Threshold........................................<45 dB-Hz (C/N0) for acquisition

bullet

Input Impedance.................................................................50 Ohm

bullet

Input Connector........................Type-N, Female Std. (SMA Optional)

bullet

Output Impedance........................................100 Ohm, single ended

bullet

Output Connector.............................Terminal Plug and BNC Female

bullet

Tracking Gradient...............................................0.5 V/dB, Standard

bullet

Tracking Response.........0 to +10 VDC for a 20 dB input level change

bullet

System Level Adjust......................................0 to 60dB,0.5dB Steps

bullet

Frequency Reference.............................................10 MHz (Internal)

bullet

Phase Noise.....................................>75 dBc-Hz, 1 kHz from Carrier

bullet

Alarms............................................................................Unit Lock

bullet

Alarms Relay......................................................................Form-C

bullet

External LNB Power............+24 VDC, switchable In-Out, 500ma max

bullet

CDS (OPTIONAL)..................RS-232, DB-9 female connector on rear

bullet

Front Panel Display..........................................Vacuum Fluorescent

bulletM & C......................RS-232 or RS-422/485 Switchable on rear panel
bulletM & C Connector............................................DB-9, Female on rear
bulletEthernet 10/100 Base T......... .(OPTIONAL) Not installed on STD unit
For Ethernet Specifications CLICK HERE
bulletEthernet Connector.....................................................RJ-45 on rear

Physical Characteristics:

bullet Size................................................ 1.75" H X 16.00" D X 19.00" W
bullet Weight......................................................................8 lb. (3.63 kg)
bulletPrimary Power.............90 - 264 VAC, 47 - 63 Hz, 1.4A Auto-Sensing

Environmental Specifications:

bulletOperating Temperature................................................00c to +500 c
bulletStorage Temperature................................................-400c to +700 c
bullet Humidity...............................................................95% RH @ 400 c

CDS Continuous Digital Streaming Option:

The streaming option associated with the ASC300 series of beacon tracking receivers provides a continuous, two byte, data stream running at 9600 baud that contains ten bits of signal strength level indication as well as lock or alarm condition of the unit. A female DB9,  interface connector on the rear of the unit is specifically dedicated for this option.

For Sales Quotation Call or Email:  sales@atlanticsat.com

For Engineering Questions Call or Email:  engineering@atlanticsat.com  

 adobeProduct Spec. Sheet                                                                 adobereader

Back to Product Page

 

   
 
Home ] Products ] Warranty ] About ] Contacts ] Services ] Terms ] Agents ]

Atlantic Satellite Corporation
5241 Cleveland Street, Suite 112
Virginia Beach, Virginia 23462

Telephone: 757-318-3500
Fax: 757-318-7020
www.atlanticsat.com

ATLANTICSAT is a leading designer and manufacturer of Satellite Communication Products such as our ASC300Ku1-E 10-7 to 11.7 GHz Ku-Band beacon receiver and other various beacon tracking receiver products. Our satcom beacon receivers can be interfaced with other equipment such as Uplink Power Control units (UPC) and/or Antenna Tracking Controllers. Our complete line of ASC300 series beacon tracking receivers can be found on our Products page. Our ASC500LE series upconverters which can be used with Block Upconverters (BUC) and or Solid State Power Amplifiers (SSPA) can also be found on our Products page. Our ASC401LE series downconverters can be used with Low Speed Data Modems and or Digital and Analog Video/Audio Receivers. We also carry Frequency Translators such as our ASC710 series Test Loop Translators and other Satcom Products.

© copyright 2004 Atlantic Satellite Corporation All Rights Reserved